Please find below all datasheets currently available. If you require further information please contact us.
Bushes (Flexible Bearings)
- The fully bonded bush consists of rubber bonded between two concentric steel sleeves. The bush is designed to accommodate small torsion, conical and axial movements and endure radial loads.
- Duplex bushes are similar to standard bushes, but are reinforced with an intermediate tube. This bush configuration provides high radial load bearing whilst retaining low axial and torsional stiffness rates.
- Inner sleeve bushes consist of rubber bonded to the inner sleeve and are designed to accommodate small torsion, conical and axial movements and endure radial loads.
- A semi-bonded bush consists of rubber sandwiched between two concentric steel sleeves. The rubber is bonded to the inner sleeve and interference fitted to the outer sleeve. The semi-bonded bush is designed to accommodate small torsion, conical and axial movements and endure radial loads.
- These bushes consist of a contoured inner and outer metal forming a ball-joint, articulated by a thin annulus of rubber. They are designed to accommodate high radial and axial loads and allow conical and torsional displacement and misalignments.
- The spring-eye bush consists of rubber bonded to an inner tube and force-fitted into an outer sleeve. The spring-eye bush is similar to the semi-bonded bush series, although the outer metals are turned over to increase radial and axial load bearing capability.
Couplings
- Available in various sizes, our couplings can be customised to meet your specific needs, ensuring optimal performance and reliability. These couplings are essential for effective power transmission and reducing vibration in mechanical systems.
Mounts and buffers
- Our high-quality buffers are available in both cylindrical and rectangular configurations, specifically designed to isolate vibrations and shocks. These anti-vibration mounts are essential for reducing noise and extending the lifespan of machinery by preventing damage from excessive movement.
- Our GC type flange mountings (cone mounts) are expertly designed to accommodate torsional, conical, and radial movements, providing versatile and reliable support for a variety of applications.
- Designed principally to endure axial loads and accommodate torsional, conical and radial movements.
- Sandwich, bobbin and shear mounts are used for a variety of applications including engine mounts and vibration equipment. They are designed to accommodate misalignment and provide vibration and shock isolation for shear and compressive axial loads.
