Aegis Rubber Engineering

Unit 14-15 Bolney Grange Business Park

Stairbridge Lane

Haywards Heath

West Sussex RH17 5PB


+44 (0) 1444 871116

+44 (0) 1444 244720


Specialist Vehicle & Automotive

Home  >  Sectors

Specialist Vehicle & Automotive

Aegis Rubber Engineering takes pride in catering to the dynamic and expansive realm of Specialist Vehicle & Automotive components.

Our comprehensive range of meticulously designed and manufactured products spans from anti-roll-bar bushings to engine suspension mountings, addressing the diverse needs of this vibrant market.


Our Client Base Includes:


At Aegis Rubber Engineering, we offer an extensive array of products crafted from a variety of materials, including natural and synthetic rubbers, along with cutting-edge polyurethane solutions. 


Our commitment to innovation ensures that our components not only meet but exceed the exacting standards of the industry. Whether you're a bus OEM, an enthusiast of vintage vehicles, or part of the research and development community, Aegis Rubber Engineering is dedicated to enhancing your automotive solutions. With experience in refurbishing vintage components, we can offer the choice of new or reconditioned parts where suitable for your application.


Explore our offerings, where quality meets innovation, and discover how we can elevate the performance and durability of your specialist vehicles and automotive components. 


We can meet your requirements for:


Bonded bushes

The fully bonded bush consists of rubber bonded between two concentric steel sleeves. The bush is designed to accommodate small torsion, conical and axial movements and endure radial loads.


Cylindrical and rectangular buffers designed for vibration and shock isolation.

Cone Mounts/Flange Mounts

Designed to accommodate torsional, conical and radial movements,

Duplex Bushes

Duplex bushes are similar to standard bushes, but are reinforced with an intermediate tube. This bush configuration provides high radial load bearing whilst retaining low axial and torsional stiffness rates.

Inner Sleeve Bushes

Inner sleeve bushes consist of rubber bonded to the inner sleeve and are designed to accommodate small torsion, conical and axial movements and endure radial loads.

Link Arm Assemblies

We can provide complete link arm assemblies using either customer supplied metalwork or in-house fabricated components.

Power Take-Off Couplings

We make a variety of sizes of couplings and can build custom sizes to your specification.

Sandwich, Bobbin and Shear Mounts

Sandwich, bobbin and shear mounts are used for a variety of applications including engine mounts and vibration equipment. They are designed to accommodate misalignment and provide vibration and shock isolation for shear and compressive axial loads.

Semi Bonded Bushes

A semi-bonded bush consists of rubber sandwiched between two concentric steel sleeves. The rubber is bonded to the inner sleeve and interference fitted to the outer sleeve. The semi-bonded bush is designed to accommodate small torsion, conical and axial movements and endure radial loads.


We offer a variety of non-standard bushes, designed to customer specification. If required we can use customer metal work to produce the finished part.

Spherical Bearings

These bushes consist of a contoured inner and outer metal forming a ball-joint, articulated by a thin annulus of rubber. They are designed to accommodate high radial and axial loads and allow conical and torsional displacement and misalignments.

Spring-Eye Bushes

The spring-eye bush consists of rubber bonded to an inner tube and force-fitted into an outer sleeve. The spring-eye bush is similar to the semi-bonded bush series, although the outer metals are turned over to increase radial and axial load bearing capability.

Block products